HSP500

Handy high-voltage test device for quick testing of insulation

The portable test set HSP500 is designed for field testing and is suitable for fast high-voltage tests Further, this device can also be used to control piezo elements.
The dual connector allows to connect a test object and an external multimeter simultaneously. The output voltage can be adjusted with the rotary knob of the HSP500 in the range of 0 – 100% and the test is started by simply pressing the start button.

A successful test will be indicated with a green LED lighting up. The device will consider a test unsuccessful if a current over 3mA is detected, which will be recognized as a short-circuit and indicated with a red LED.

For testing devices with an output voltage above >500V, a voltage divider for the measuring output is already installed. The battery powering the HSP500 can be easily replaced by removing the four screws at the bottom of the case. Optionally, a multi-turn potentiometer can be installed to support fine-grained adjustment of the output voltage and all standard plug connectors are available for installation. Each device is delivered with an individual test report and factory calibration certificate.

HSP500